How To Patch An Air Mattress : Complete Guide

Photo Source

If you have an air mattress, then at some point you’re going to need to patch it. Air mattresses can develop leaks for a variety of reasons, from normal wear and tear to accidental punctures. No matter what the cause, it’s important to be able to fix the leak quickly and easily so you can get back to sleeping on your bed.

In this guide, we’ll walk you through the process of patching an air mattress. We’ll show you how to identify a leak, choose the right type of patch, and apply the patch correctly. With these instructions, you’ll be able to fix any air mattress leak in no time!

What Is An Air Mattress?

Photo Source

An air mattress is an inflatable, portable bed. Air mattresses are most commonly used for camping, temporary guest beds, or as a permanent bed for small children or pets. Air mattresses are made from PVC, nylon, or plastic and are inflated with a pump. There are two types of air mattresses: raised and non-raised. Raised air mattresses have built-in pumps that automatically inflate the mattress when plugged into an outlet. Non-raised air mattresses must be inflated manually with a separate pump.

Steps On How To Patch An Air Mattress

Photo Source

Patching an air mattress can be a real pain, especially if you don’t know how to go about it. There are multiple ways you can patch an air mattress and we’re going to show you some of the most popular methods.

What You’ll Need

  • A clean work surface
  • A sharp knife or scissors
  • A strong adhesive like superglue or Gorilla Glue
  • A piece of heavy duty plastic or rubber (for bigger holes)
  • Patches (you can buy these at most hardware stores)
  • A hair dryer (optional)


  1. Clean the area around the hole with soap and water. This will help the adhesive bond better.
  2. Cut away any loose threads around the hole.
  3. If the hole is small, you can simply apply some adhesive directly to the hole and then place a patch over top. Apply pressure for 30 seconds to 1 minute to make sure the patch is secure.
  4. If the hole is bigger, you’ll need to create a makeshift patch out of plastic or rubber. Cut a piece that’s slightly larger than the hole and then glue it in place with a strong adhesive. Once again, apply pressure for 30 seconds to 1 minute to make sure it’s secure.
  5. You can then place a regular patch over the top of the plastic or rubber patch and glue it down.
  6. Let the adhesive dry completely before using the air mattress. This could take anywhere from 24 to 48 hours.
  7. If you’re in a rush, you may speed up the drying process by using a hairdryer on the low setting. Just watch out for overheating the glue.

Different Ways On How To Patch An Air Mattress

Photo Source

Once you have your supplies, there are a few different ways that you can patch your air mattress. We’ll go over three popular methods so that you can choose the best one for your needs.

1. Use a Patch Kit

If your air mattress came with a patch kit, then this will be the easiest way to fix it. Simply follow the instructions that come with the kit and apply the adhesive to both the hole in the mattress and the patch. Then, press the patch firmly onto the hole and hold it there for a few minutes to allow the adhesive to set.

2. Use Duct Tape

If you don’t have a patch kit, duct tape is a great alternative. Start by cleaning the area around the hole with a damp cloth to remove any dirt or debris. Then, cut a piece of duct tape that’s slightly larger than the hole. Place the duct tape over the hole and press down firmly. Use your fingers to smooth out any wrinkles or bubbles.

3. Use Super Glue

Another option is to use super glue to fix the hole. Start by cleaning the area around the hole with a damp cloth. Then, apply a small amount of super glue to the hole. Be sure not to use too much or it will seep through and make a mess. Press the patch onto the hole and hold it there for a few minutes to allow the glue to set.

Importance Of Patching An Air Mattress

As you probably know, an air mattress is an inflatable mattress, which means that it needs to be inflated in order to be used. However, over time, the air mattress can develop leaks. These leaks can be caused by several different things, such as punctures, holes, or simply wear and tear.

If you don’t patch the leaks, the air mattress will slowly lose air and eventually become unusable. That’s why it’s important to know how to patch an air mattress – so you can keep using it for a long time to come.

Final Thoughts

Now that you know how to patch an air mattress, you can sleep soundly knowing that your mattress is as good as new. No more leaks and no more saggy spots! Be sure to follow the steps outlined in this guide and you’ll have your mattress patched up in no time. Thanks for reading!


Leave a Comment